Master SCART Controller.

Input:
SCART input connector for video and audio, including Pin 8 (widescreen switching) and Pin 16 (function switching).
Compatible with RGB input from domestic video equipment, S-Video or composite video typically 1V pk-pk.

Output:
Same as input video.

Switching Bandwidth:
In excess of 80MHz.

Power:
Supplied with a 9V unregulated power supply (12V unloaded). 12V regulated supply or 9V unregulated recommended.
Power consumption <1W.
LED power indicator (internal).

Dimensions:
120x98x45mm.

Technical Support:
By email to msc-support@js-technology.com

RGB to S-Video Converter.

Input:
RGB input from domestic video equipment, 1V pk-pk.
SCART input connector.

Output:
Separated luminance and chrominance signals via a 4-pin mini-DIN connector (S-Video).
Left and right audio available via phono connectors.

Auto-detection:
Computer analysis of input signal to determine if the RGB input is formatted for PAL or NTSC.
Chrominance subcarrier automatically adjusted to suit - 4.43MHz for PAL and 3.58MHz for NTSC.
PAL and NTSC phase information adjusted to suit video standard.
(This does not converter PAL to NTSC or vice versa, please see GTH Electronics for such a unit.)

Power:
Standard fused UK mains plug, 230V and 50Hz ac.   Power consumption less than 5W.
LED power indicator.

Dimensions:
120x85x35mm.
 

RGB to S-Video Converter Version 2.

Input:
RGB input from domestic video equipment, 1V pk-pk.
SCART input connector.

Output:
Separated luminance and chrominance signals via SCART.
RGB passed through to a SCART connector.
Left and right audio available at the SCART.

Power:
Standard fused (3A) UK mains plug, 230V and 50/60Hz ac. Power consumption 1W. LED power indicator.

Dimensions:
150x85x48mm.

RGB to Plasma VGA.

Input:
RGB input from domestic video equipment, 1V pk-pk.
SCART input connector.

Output:
RGB with separated horizontal and vertical synchronisation information at TTL levels (0V to +5V) via a
15-pin density and a half D-Type VGA connector.
Left and right audio available via phono connectors.

Copy Protection Compatibility:
Computer control to enhance compatibility with copy protected sources while still maintaining accuracy of unit.

Power:
Standard fused (3A) UK mains plug, 230V and 50/60Hz ac.    Power consumption 1W.   LED power
indicator.

Dimensions:
150x85x48mm.

RGB to Plasma VGA Version 2.

Input:
RGB input from domestic video equipment, 1V pk-pk.
SCART input connector.

Output:
RGB with separated horizontal and vertical synchronisation information at TTL levels (0V to +5V) via a
15-pin density and a half D-Type VGA connector.
Left and right audio available via phono connectors.
Gold output connectors..

Copy Protection Compatibility:
Computer control to enhance compatibility with copy protected sources while still maintaining accuracy of unit.

Power:
Standard fused (3A) UK mains plug, 230V and 50/60Hz ac.    Power consumption 1W.   LED power
indicator.

Dimensions:
150x85x48mm.

RGB to Component (YUV).

Input:
RGB input from domestic video equipment, 1V pk-pk.
SCART input connector.

Output:
Y video at 1V pk-pk with colour difference signals, U & V, at appropriate levels.
Left and right audio available via phono connectors.

Copy Protection Compatibility:
Computer control to enhance compatibility with copy protected sources while still maintaning accuracy of unit. This will not allow copies to be made from this unit.

Power:
Standard fused (3A) UK mains plug, 230V and 50/60Hz ac. Power consumption 1W. LED power indicator.

Dimensions:
150x85x48mm.

Active Video Buffer.

Input:
RGB / S-Video / Composite input from domestic video equipment, 1V pk-pk.
SCART input connector.
75 ohm terminations.

Output:
Two separated outputs via SCART connectors.
All video signals are buffered for 75 ohm reverse terminated cables.
Audio and wide-screen information passed through.

Power:
Standard fused (3A) UK mains plug, 230V and 50/60Hz ac.
Power consumption 1W.
LED power indicator.

Dimensions:
150x80x55mm.