HDMI CAT5E/CAT6 Extender

Connect HDMI sources to displays up to 60m apart for 1080p.

More details

On sale On sale!
£39.00 tax incl.

  • Connect HDMI sources to displays up to 60m apart for 1080p.
  • Supports HDMI 1.3.
  • Up to 28m for 1080p, depending on cable quality.
  • Use inexpensive CAT5E/CAT6 network cables.
  • Network cables are easier to route during installation.
  • Supports HDMI 1.3.
  • Supports 36-bit Deep Colour.
  • Gold plated connectors.
  • HDCP Compatible.

 

When you have a considerable distance between an HDMI source and display the HDMI CAT5E / CAT6 Extender is the solution. Using inexpensive CAT5E / CAT6 network cables over the long length saves on expensive HDMI leads.   CAT5E / CAT6 is easier to install being of a smaller diameter, and one where you can fit your own connectors to.

 

The HDMI CAT5E / CAT6 Extender consists of two modules, the SENDER module connects to the HDMI source and the RECEIVER module is used at the display side. These two modules are then connected using two identical lengths of CAT5E / CAT6 network cable. No other set up is required and the remote display will then operate as normal.